There are two types of fixing, standard (screwed) and quick (clipped). In the case of a quick-fit, it is necessary to use an adapter, a quick-fit ring, which is sold separately.
Head with standard mounting
The head is screwed onto the screwdriver.
Please tell us the diameter of the suction sleeve, if in doubt, please send us the screw drawing.
Note: The drill bit is not included
Lecureux article number: 0003.041.600
Head with quick-release fastener
The head is clipped onto the screwdriver.
Please tell us the diameter of the suction sleeve, if in doubt, please send us the screw drawing.
Note: The drill bit is not included. The quick release ring is not included with the head.
Lecureux article number: 0003.041.800
Quick-release ring for screwdriver
One ring per screwdriver is required to use the quick-release heads.
Order number: 0003.041.802
Important: when ordering, it is necessary to specify the diameter of the suction sleeve, we are at your disposal in case of doubt.
The different diameters of the suction sockets are identified according to the colour code below as standard:
| Suction sleeve diameter [mm] | Colour | |||
| 0.50 | 1.50 | 2.50 | 3.50 | Brown |
| 0.60 | 1.60 | 2.60 | 3.60 | Pink |
| 0.70 | 1.70 | 2.70 | 3.70 | Orange |
| 0.80 | 1.80 | 2.80 | 3.80 | Grey |
| 0.90 | 1.90 | 2.90 | 3.90 | Yellow |
| 1.00 | 2.00 | 3.00 | 4.00 | Green |
| 1.10 | 2.10 | 3.10 | 4.10 | Red |
| 1.20 | 2.20 | 3.20 | 4.20 | Black |
| 1.30 | 2.30 | 3.30 | 4.30 | Blue |
| 1.40 | 2.40 | 3.40 | 4.40 | Purple |